HawkJaw Sr. Model M100K-2GSR – Rebuilt

Two Units available with specs below. Can be provided with an electrical or diesel driven HPU if needed.

Part No.: 060-20000-HJ-REC HAWKJAW SR Model 100K-ALS
Description: Integrated make-up/break-out tool for drill pipe and associated tubular. Allows single
operator to control all tool functions from consoles mounted on the tool. Consoles include controls
for pipe spinner, self energized torque wrench, vertical positioning system, forward and backward
tilt (+ 15°), and pull-back winch. Also includes spinning chain oiler system, adjustable torque
regulator, torque gauge and “Low Torque” warning system. Unit is shipped in reusable structural
steel transportation skid and includes quick-disconnect connectors for hydraulic and pneumatic
supply lines. Two (2) Operation/Maintenance manuals are included with shipment, and additional
copies are available upon request.
Specifications:
➢ Torque: 100,000 ft. lbs Make/Break
➢ Tool Joint Size Range: 4” – 9 1/2” O.D.
➢ Spinner size range: 2 7/8”- 9 1/2” O.D.
➢ Hydraulic requirements: 20-35 gpm @ 3000 PSI.
➢ Closed-center system (optional open-center system available)
➢ Air supply requirements: 2-10 cfm @ 100 PSI
➢ Dimensions: Height: 101.5”, Width: 56.1”, Depth: 60”, Weight: 4,700 lbs.

Part No.: 060-50000-HJ2G-REC HAWKJAW SR Model M100K-2GSR
Description: Integrated make-up/break-out tool for drill pipe and associated tubular. Allows single
operator to control all tool functions from consoles mounted on the tool. Consoles include controls
for pipe spinner, self energized torque wrench, vertical positioning system, forward and backward
tilt (+ 15°), and pull-back winch. Also includes spinning chain oiler system, adjustable torque
regulator, torque gauge and “Low Torque” warning system. Unit is shipped in reusable structural
steel transportation skid and includes quick-disconnect connectors for hydraulic and pneumatic
supply lines. Two (2) Operation/Maintenance manuals are included with shipment, and additional
copies are available upon request.
Specifications:
➢ Torque: 100,000 ft. lbs Make/Break
➢ Tool Joint Size Range: 4” – 9 1/2” O.D.
➢ Spinner size range: 2 7/8”- 9 1/2” O.D.
➢ Hydraulic requirements: 20-35 gpm @ 3000 PSI.
➢ Closed-center system (optional open-center system available)
➢ Air supply requirements: 2-10 cfm @ 100 PSI
➢ Dimensions: Height: 101.5”, Width: 56.1”, Depth: 60”, Weight: 4,700 lbs.